|
Lithionics
Battery
creates the World's first Wirelessly Controlled
Lithium Ion Vehicle Battery!
Why
is our Wireless Remote so Great?
First,
it is really two devices in one:
1 ) The wireless remote is a great security and anti-theft
device. By clicking the button on the remote after you
exit your vehicle, you "shut off and lock" your
Lithionics lithium ion battery. The car cannot be jump started
or hot wired without clicking the "on" button
of the remote (the battery will be in sleep mode with ZERO
VOLTAGE at the battery posts and will not activate). This
means that in many cases that for a thief to steal your
vehicle, they will have to physically remove and replace
the battery.
2 ) The wireless remote is also great for vehicle
storage or for vehicles that have a large parasitic
drain or draw. This feature is especially handy if your
vehicle has a battery location that is very difficult to
reach to disconnect your regular lead-acid battery. This
function is great for vehicles that only see occasional
use - such as some Emergency Response Vehicles. You can
simply the click the "off" button on the wireless
remote and your battery will enter sleep mode, ensuring
that when the Emergency Response Team is called and you
go to start the vehicle again, it will be ready and charged
for you (our lithium ion batteries also store energy up
to 5 X longer than lead-acid batteries).
You
may ask "What if I misplace or lose the Wireless
Remote?"
Well,
we thought of that too. When you order your Lithionics Battery
with our "Wireless Remote NEVERDIE Option",
your battery will come supplied with TWO WIRELESS REMOTE
KEY FOBS - so you always have a spare. This is also
a great feature if there are two drivers of the same vehicle
(such as Team Members that Patrol together or share the
same vehicle).
|
The
2 videos show how both the "pushbutton"
and "wireless remote
key-fob" controls completely shut off power
to the battery terminals.
This
function is useful for:
- Storing
your vehicle/ battery
- Working
on your vehicle when the battery needs to be disconnected
- As
an anti-theft option
- When
you have a parasitic electrical draw
|
|
Click on the 2 video icons to view
the short "NeverDie" 
|
|
|
|
Pushbutton
Demo
(17.9
Mb, 20 seconds long)
|
Key-fob
Demo
(17.8
Mb, 20 seconds long)
|
|
|
You
may also ask "What is NEVERDIE?"
NeverDie is
an option that can be ordered with ALL of our batteries
at extra cost. This is a Low Voltage Cutoff (LVC) circuitry
built into the battery that will allow you to use the electricity
in your battery with the engine off and the battery will
automatically enter "sleep mode" once the battery
is drawn down to 10% to 20% of its charge in our Automotive
Engine Start Lithium-ion Batteries. For all "engine
starting batteries", we can custom program this cut-off
point from to 30% of its charge. For all our deep-cycle
lithium-ion batteries equipped with the NeverDie System,
the draw down percentage is just 3% to 5% of the batteries
total capacity/ charge. This means you can use up to 97%
of the energy in the battery before it enters "sleep
mode". This way, you cannot drain your new lithium-ion
battery completely - allowing you enough energy for at least
2 or more engine starts.
The
Factory Preset cut-off point for NeverDie equipped Automotive
Engine Start Lithium-ion Batteries is 10% to 20%. In cold
climates and for machinery/ vehicles that are difficult
to start, we recommend that you order the battery with a
30% cut-off point.
If
you order the NEVERDIE Pushbutton, a simple button
will be located on the top of your battery to manually shut
down the battery for storage or to "wake up" the
battery from sleep mode.
If
you order the NEVERDIE Pushbutton, a simple button will
be located on the top of your battery to manually shut down
the battery for storage or to "wake up" the battery
from sleep mode.
If
your battery location is hard to reach, we suggest that you
order the "Wireless Remote Key-Fob NEVERDIE Option".
|
|
Need
Accessories for Your Lithionics Lithium Ion Battery?
We got you covered...
|
|
|
-
High and Low Frequency
- External & Installed Chargers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTES:
* All Prices Subject to Change. Shipping/ Freight is extra.
"CA" means Peak Cranking Amps
"CCA" means Cold Cranking Amps
"Ahr" means Amp Hours.
Note: 1 Lithium Ion AHr = 2 Lead Acid AHr
"EXT" means Extended Height battery
"RH" means Reduced Height battery
|
|
Web Site Map 
