PERFECT SWITCH SOLID STATE PROGRAMMABLE
AUTONOMOUS RELAYS

Quick Specs: Programmable Autonomous DC Relays Gen 4.1 Current Rating: 50 to 600 Amps Operating Voltage: 7.5 to 48 VDC (12 Volt, 24 Volt and 48 Volt models available) Voltage Drop at Max Current: 30mV Temperature Range: -40 to +105 C Weight: 14.7 ounces Dimensions: 5.40" x 2.86" x 1.57" Priced: From $291.00 USD See Pricing Details Below...

Programmable Autonomous DC Relays Gen 4.1 A single, high current module to handle all your LVD needs Highest performing low Voltage disconnect on the market One input from the battery One output post for all high and low current accessories Decreases vehicle downtime and lost productivity due to discharged battery High and low Voltage cutoff Over-current protection Over-temperature protection Short circuit protection Timers and delays Manual override trigger Manual activation trigger Transient self-protection Fully autonomous operation Industry-leading, ultra-low on-state resistance Internationally patented arrayed MOSFET technology No heat sinks or airflow required No de-rating required over full temperature range Fully encapsulated solid state design Programmable Autonomous Relays have an integrated factory programmable micro-controller with options like timing features, delays, voltage sensing turn-on or turn-off, and logic feedback for easy system integration. Commonly used as a traditional Low Voltage Disconnect, the POWER-GATE Autonomous Relay can be programmed to sense system battery voltage, and protect the system from accidental battery discharge. Autonomous relays span the entire POWER-GATE voltage and current spectrum. Contact us and let our talented applications engineers help determine what configuration is best for your application. IMPORTANT: If you have a Balmar External Voltage Regulator connected in the system please advise so that we can program the trigger time to one minute (Balmar regulators have a 35 second delay before they power up). Relay Programming Options: Click here for the PDF document that you can complete and get back to us by email, mail .

PACKAGE CHARACTERISTICS:

• Vacuum-formed Acrylonitrile Butadiene Styrene (ABS)
• Black 2-part, flame retardant filled epoxy - electronics grade
• Three integrated LED's for visual status and diagnostics
• Four .250" integrated mounting holes
• 5/16-18 x .500" machined brass connection posts
• 6-32 brass ground post with provided ring terminal
• 10-pin Molex control harness
• Vinyl post insulators
• Weight: approximately 14 ounces (0.396kg)

• differentiation between in-rush and shorted conditions
• response to low or high Voltage thresholds
• timers to delay turn on or off
• overcurrent protection
• over temperature protection
• precision circuit breaker functionality
• fault status and troubleshooting feedback

• Circuit Breakers are specifically programmed for precision current monitoring and circuit breaking functionality.
• Voltage Sensitive Disconnects, also known as low voltage disconnects (LVD) are specifically programmed for popular low voltage/high voltage cutout applications. They can also be remotely adjusted using a Remote Control Programmer (coming soon)

Perfect Switch Relay Information

POWER-GATE Solid State Relays are constructed based on their patented arrayed MOSFET technology. MOSFET transistors have an integrated body diode and depending on the application's direction of current flow, two primary configurations of POWER-GATE Relays are offered: uni-directional and bi-directional. All relays can be manually controlled, autonomously controlled, or a mix of both manual and automatic features.

Uni-Directional Relays can be controlled manually, triggered when the user applies system Voltage to the device's trigger input. When trigger is applied the relay closes (conducts current), and when trigger is removed, the relay opens (ceases to conduct current). They can also be configured to work autonomously where the on-board micro controller decides when to conduct current, or not to conduct current based on system Voltage, timing, or current cues. With this kind of flexibility built into every relay, devices can be configured to serve as:

ISOLATOR DEVICES/ RECTIFIERS

POWER-GATE Battery Isolators are industry leading, high performance, one-way electrical valves. They are commonly deployed in multi-battery applications where independent discharge or battery separation is required. Never confuse conventional battery isolators with POWER-GATE battery isolators. POWER-GATE devices enjoy ultra-low on-resistance and require no heat sinking and no airflow at currents up to 600 Amps.

Recommended by EnerSys (manufacturer of Odyssey, Hawker, Loadhog, Powersafe, General, NP, Ironclad, Genesis, Heritage, and Varta batteries), and utilized in both military and civilian applications, POWER-GATE Battery Discharge Controllers insure that power gets to where it's needed without the excessive heat and Voltage drop typified by more common, lesser performing silicon and Schottky devices. Unlike conventional silicon and Schottky isolators, POWER-GATE's achieve sub-100 micro-ohm performance, even as the currents climb through 600 Amps; that's over 1,000% more efficient than traditional silicon and Schottky technology. With heat being the primary killer of electronics, engineering heat OUT of the product yields unparalleled reliability.

Questions/ Want to place an order? Call us at 604-510-0800 or Email Us

Back to the Perfect Switch Main Page